XRP aviation lighting system.

 

It is most advance; realistic lighting R/C lighting system of aviation in the market. The artificial intelligence design of this system can automatically identify the quantity of LED,   

 

 

User can add or remove LED at will (Maximum 9 watt on each module); automatically on off when connected to retract channel(nose gear light), The nose gear light will on or off after 3 seconds of gear retract or gear detract.  Indi vial light can connect to Aux Chennai for landing light or logo light.

 

 

Because flashing light interval is difference for each plane, this system can adjusting the flashing time interval( flashing time 1 - 3 seconds). 

 

Internal output voltage control, the LEDs is no need use resistor.

 

Input voltage is 4.8 - 6V, you can use power supply form ESC/ UBEC or use external independent battery.

 

Gas plane can use the 4.8V receiver battery directly.

 

Circuit board is protected by a plastic housing.

 

Length of LED wire 1000 mm

 

Weight of controller : 14g

 

Full set system : 96gFeatures:

.Total output of all LED 50 Watt

.Auto nose gear light with 3 second delay

.Additional lighting control by AUX CH

.No resister required to all LED blub

.Free combination LED blub(each module, as long as not over the limit of watt)

.Adjustable flashing interval to Strobe and Beacon.

Spec:

Input: 2 channels (Retract & Aux)

Power: 4.8V - 6V

Max draw: 50W

Weight: 96g 

Dimensions: (control unit only) 27.5mm x 57.5mm x 15.6mm weight 14g

Lights:

5 x 8mm(0.5W) white LED 1M lead

3 x 8mm (0.5W) red LED 1M lead

1 x 8mm (0.5W) green LED 1M lead

2 x 5mm (0.3W) white LED 1M lead (Collecting)

2 x 20mm Collecting mirror